Adjustable Steel Base for Franek 12kW Inserts Stove

FIREPLACE INSERT SUPPORT FRAME
The support frame of the insert is designed to make the insert higher and to adjust its height to the
desired level. Thanks to the legs moveable up to 5 cm, you can safely place the fireplace insert even on
a considerably uneven surface.
Assembly instructions:
Start assembling the support with screwing the support legs with the left and right side angles; then
screw the front and the back angle. Screw the height adjusters together with the nuts into the frame
legs. After assembly, adjust the height of the support frame by using the height adjusters and securing
them with the nuts. The maximum support frame load is 750 kg.

Assembly instructions:
Start assembling the support (the leg) with unscrewing the height regulators with the foot from the
insert. Screw the height regulator together with the counter nut into the leg base. Next, screw the legs
to the insert by means of the appropriate screws with washers and tighten the nut. After the legs are
screwed to the insert, adjust the height and level the insert by means of the height adjusters and
securing them with the nuts. The maximum support frame load is 750 kg. The adjustable foot is not
included in the set, it should be unscrewed from the fireplace insert.